neuf > Harmonicas > Lone Wolf

Lone Wolf Harp Octave

Description :

The Harp Octave is a great tool for the harp player who wants to have diverse sounds. It is a clean octave-up generator that adds a great effect for harp. The octave-up overtone that the pedal adds manifests itself in the mid-range with a rasp that brings out whatever distortion is going on with the amp. If you’ve ever wanted your big amp to sound like a nasty little vintage Champ or Princeton, this is the pedal that’ll do it. The effect will really cut through the mix and reduce feedback ; you will get more volume out of your amp before feedback than ever before. It has a buffered input, true bypass, a BLEND control and a VOLUME control. The BLEND control increases or decreases the level of the generated octave, and the VOLUME control allows you to have more control over your volume for solos and when playing into a PA. The buffered input provides the high impedance termination necessary to get the best tone form crystal, CM, and CR elements ; the output is also high impedance and plugs straight into your amp. The LED is ON when the effect is in, and is OFF when the effect is in bypass. The IN jack serves as the ON/OFF switch so the pedal cannot be accidentally turned on and run your battery down. Plus, unlike guitar pedals, there is no loss of tone through the Harp Octave. The Harp Octave offers all of this and a money-back guarantee if you are not satisfied for any reason.
SETTINGS
The settings are very basic. When the BLEND control is fully counterclockwise only the dry signal is heard, and as you turn the control clockwise the octave will increase in level until it is at the same level as the dry signal. The VOLUME control sets your output level, which does have a small amount of gain available for increasing the your volume when desired.
POWER
The Harp Octave operates off of a 9 V battery or a 9V DC power adapter. To make it all just a little easier Lone Wolf is offering a power supply for US and EURO customers to power your Harp Octave. The AC adapter requirements are 9V DC with a minimum 200mA output and a 2.1mm x 5.5mm connector with a negative center and positive outside. The battery is switched OFF when an external power supply is used, and the unit is always powered whenever the mic is plugged in.

Réserver le produit Harp Octave

Pour demander la réservation de ce produit, n’hésitez pas à nous contacter
par téléphone au 02 31 85 43 34 ou via le formulaire ci-dessous.
Nous tâcherons de vous répondre dans les meilleurs délais.